1. Clean the engine with automatic transmission removed from the car with kerosene or water-soluble solvent and a stiff brush.
2. Unscrew the mounting bolts and remove the starter.
3. Remove the bolts and remove the torque converter cover.
4. Remove the bolts securing the drive disk to the torque converter. To prevent the disc from rotating, block its ring gear with a large screwdriver. When assembling the drive disk with the torque converter, new bolts will be required.
5. Unscrew and remove the bolts securing the engine and gearbox to each other.
6. Disconnect the box from the engine, making sure that the torque converter remains in its crankcase.
Visitor comments