Car ventilation and heating Opel Vivaro A

Removal and installation of the interior ventilation system
Removal 1. Open the hood. 2. Remove the filter (figure 9.1). Figure 9.1. Remove the filter. Installation 3. Installation is carried out in the reverse order of...

Removal and installation the ventilation and heating control panel
Removal 1. Disconnect the battery. 2. Disconnect the gear shift lever cover A, then unscrew the four console mounting bolts B (figure 9.2) Figure 9.2....

Removal and installation heater control flap rods
Removal 1. Remove the control panel (from the control unit side) (figure 9.9). Figure 9.9. Remove the control panel (from the control unit side). 2. Remove the...

Air distribution unit
To access the air distribution unit A, it is necessary to remove the instrument panel and the passenger compartment reinforcement beam (figure 9.12). Figure...

Removal and installation the heater radiator
Removal 1. From the engine compartment: pinch each hose in front of the heater radiator air bleed valves. 2. From the salon side: remove the center console...

Removal and installation the heater fan
Removal 1. Open the hood. 2. Disconnect the battery. 3. Remove the fan motor from the casing by unscrewing bolts A (figure 9.16). Figure 9.16. Remove the fan...

Removal and installation the power module
The power module controls the speed of the electric fan depending on the position of the switch. Access to the module is possible without removing the electric...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: