Clutch — general information On the models in question, a single-disk dry clutch with a diaphragm spring is installed. Frontera clutch drive is hydraulic. Contains the main and working...
Clutch Specifications Note. Separate characteristics are also given in the text of the Chapter. Design features Single disc, dry, with central diaphragm spring Drive unit Hydraulic,...
Removal and installation of clutch To gain access to the clutch mounting bolts, the gearbox must be removed. 1. Mark the position of the clutch in relation to the flywheel. This can be done with...
Clutch repair Check of end runout of a conducted disk Checking the flatness of the pressure plate Check pressure plate and basket for damage or deformation. If there is...
Clutch installation The clutch is installed in the reverse order of its removal. In doing so, keep in mind the following: 1. With the clutch removed, check the needle bearing...
Clutch test without removal Before removing the clutch in order to replace it, the following work must be carried out to determine the location of the damage. 1. Start the engine and let...
Clutch release mechanism — removal and installation Clutch Release Bearing The clutch release bearing can only be removed and installed with the gearbox removed. The bearing is attached to the housing with...
Removing air from the clutch hydraulic system Auto repair shops have a special device to remove air from the hydraulic system. The following is a common way to bleed air from a system. Air is removed from...
Pedal height and free play adjustment Clutch pedal adjustment diagram The pedal must occupy a certain position in height. Pedal adjustment is carried out in accordance with fig. The height value H...