Car doors and windows Opel Ascona C
Interior Door Trim Panel — Removal and Installation
1. Remove the retaining clip from the window lift handle. To do this, push back the socket located between the handle and the interior door trim panel and pull...
1. Remove the retaining clip from the window lift handle. To do this, push back the socket located between the handle and the interior door trim panel and pull...
Window lift mechanism — removal and installation
1. Remove the inner door trim panel as described in Section 12 . 2. Carefully remove the plastic water-repellent screen. 3. Temporarily install the window lift...
1. Remove the inner door trim panel as described in Section 12 . 2. Carefully remove the plastic water-repellent screen. 3. Temporarily install the window lift...
Door glass — removal and installation
1. Remove the window lift mechanism as described in previous Section . 2. Press the clamps and remove the seal strips. 3. Remove the rear door glass holder by...
1. Remove the window lift mechanism as described in previous Section . 2. Press the clamps and remove the seal strips. 3. Remove the rear door glass holder by...
Small fixed rear door glass — removal and installation
1. Remove the main large door glass as described in Section 14 . 2. Pull the small fixed glass together with the rubber seal out of the door frame in the...
1. Remove the main large door glass as described in Section 14 . 2. Pull the small fixed glass together with the rubber seal out of the door frame in the...
Front door lock — removal and installation
1. Remove the inner door trim panel as described in Section 12 . 2. Detach and slide back the water-repellent plastic screen. 3. Raise the glass fully. 4....
1. Remove the inner door trim panel as described in Section 12 . 2. Detach and slide back the water-repellent plastic screen. 3. Raise the glass fully. 4....
Front Door Outside Handle — Removal and Installation
1. Remove the inner door trim panel as described in Section 12 . 2. Disconnect and slide back the water-repellent plastic screen as necessary to gain access,...
1. Remove the inner door trim panel as described in Section 12 . 2. Disconnect and slide back the water-repellent plastic screen as necessary to gain access,...
Front Door Lock Cylinder — Removal, Disassembly, Assembly and Installation
1. Remove the inner door trim panel as described in Section 12 . 2. Disconnect and slide back the water-resistant plastic shield to gain access to the lock...
1. Remove the inner door trim panel as described in Section 12 . 2. Disconnect and slide back the water-resistant plastic shield to gain access to the lock...
Rear Door Lock — Removal and Installation
1. Raise the glass fully. 2. Remove the interior trim panel as described in Section 12 . 3. Move back the plastic water-repellent screen to gain access to the...
1. Raise the glass fully. 2. Remove the interior trim panel as described in Section 12 . 3. Move back the plastic water-repellent screen to gain access to the...
Rear Door Outside Handle — Removal and Installation
1. Remove the inner door trim panel as described in Section 12 . 2. Slide back the plastic water-repellent shield as necessary to gain access to the door lock....
1. Remove the inner door trim panel as described in Section 12 . 2. Slide back the plastic water-repellent shield as necessary to gain access to the door lock....
Door — removal and installation
1. The door hinges are welded to the door frame and body pillar, so it is impossible to adjust or adjust their position. 2. To remove the door, open it fully...
1. The door hinges are welded to the door frame and body pillar, so it is impossible to adjust or adjust their position. 2. To remove the door, open it fully...
Rear Door (Hatchback) — Removal and Installation
1. Disconnect the electrical wires from the heated rear window. 2. Disconnect the hose from the rear window washer nozzle. 3. Remove the trunk lid supports. 4....
1. Disconnect the electrical wires from the heated rear window. 2. Disconnect the hose from the rear window washer nozzle. 3. Remove the trunk lid supports. 4....
Rear Door Lock (Hatchback) — Removal and Installation
1. Open the rear door and detach its inner trim panel to remove it. 2. Unscrew the four screws that secure the lock. 3. Remove the fork spring clips that...
1. Open the rear door and detach its inner trim panel to remove it. 2. Unscrew the four screws that secure the lock. 3. Remove the fork spring clips that...
Rear Door Support Pillar (Hatchback and Estate) — Removal and Installation
1. The end fastenings of the posts are of the ball type with retaining rings. 2. To remove them, open the rear door fully and have an assistant support its...
1. The end fastenings of the posts are of the ball type with retaining rings. 2. To remove them, open the rear door fully and have an assistant support its...
Rear Door (Estate) — Removal and Installation
1. Open the rear door and remove the ten screws that secure the bottom and side parts of the interior panel. 2. Carefully remove the inner panel by releasing...
1. Open the rear door and remove the ten screws that secure the bottom and side parts of the interior panel. 2. Carefully remove the inner panel by releasing...
Rear Door Lock (Estate) — Removal and Installation
1. Remove the rear door interior trim panel. 2. Release the spring clip and disconnect the link rod from the lock. 3. Remove the screws securing the lock to...
1. Remove the rear door interior trim panel. 2. Release the spring clip and disconnect the link rod from the lock. 3. Remove the screws securing the lock to...
Rear Door Cylinder (Estate) — Removal and Installation
1. Remove the rear door inner panel. 2. Release the retaining clip and disconnect the control lever from the cylinder mount. 3. Disconnect the return spring...
1. Remove the rear door inner panel. 2. Release the retaining clip and disconnect the control lever from the cylinder mount. 3. Disconnect the return spring...
Interior Trunk Trim Panels (Estate) — Removal and Installation
Luggage compartment mat 1. The mat in the rear of the luggage compartment is secured with Velcro strips. Detach the strips and remove the mat; when...
Luggage compartment mat 1. The mat in the rear of the luggage compartment is secured with Velcro strips. Detach the strips and remove the mat; when...
Trunk lid — removal and installation
1. Open the lid and mark the position of the hinges in relation to the inside of the lid. 2. With the help of an assistant, unscrew the hinges from the cover...
1. Open the lid and mark the position of the hinges in relation to the inside of the lid. 2. With the help of an assistant, unscrew the hinges from the cover...
Trunk lid lock and cylinder — removal, disassembly, assembly and installation
1. Open the trunk lid and unscrew the lock mounting screws. Pull out the lock (see photo 30.1). Photo 30.1 Trunk lid lock mounting screws (indicated by arrows)...
1. Open the trunk lid and unscrew the lock mounting screws. Pull out the lock (see photo 30.1). Photo 30.1 Trunk lid lock mounting screws (indicated by arrows)...
Windshield — Removal and Installation
1. If your windshield needs to be removed and/or replaced for any reason, it is a job that is always best left to the professionals. They will do it in half...
1. If your windshield needs to be removed and/or replaced for any reason, it is a job that is always best left to the professionals. They will do it in half...
Rear window or rear door glass — removal and installation
1. All processes are very similar to those described for the windshield in the previous Section, but do not forget to first disconnect the electrical wires...
1. All processes are very similar to those described for the windshield in the previous Section, but do not forget to first disconnect the electrical wires...
Opening side window — removal and installation
1. This type of window is installed on two-door Saloon models. 2. Unscrew the window latch. 3. Disconnect the window from the hinges. 4. The lock of such a...
1. This type of window is installed on two-door Saloon models. 2. Unscrew the window latch. 3. Disconnect the window from the hinges. 4. The lock of such a...
Fixed side glass — removal and installation
1. This type of glass is installed on Hatchback models. 2. Ask the assistant to catch the glass as you push it (the glass) outwards with the force of your...
1. This type of glass is installed on Hatchback models. 2. Ask the assistant to catch the glass as you push it (the glass) outwards with the force of your...
Roof hatch (removable type) — operation description
Figure 11.60. Control handle for removable hatch cover. Operate the hatch cover by turning the handle in the direction indicated by the arrows Figure 11.61....
Figure 11.60. Control handle for removable hatch cover. Operate the hatch cover by turning the handle in the direction indicated by the arrows Figure 11.61....
Sunroof (Sliding Type) — Operation, Removal and Installation
Figure 11.64. Sliding type hatch cover control handle 1. To open this type of sliding roof, you need to pull the control handle out of its housing until it...
Figure 11.64. Sliding type hatch cover control handle 1. To open this type of sliding roof, you need to pull the control handle out of its housing until it...
Sunroof (Sliding/Tilting Type) — Operation and Maintenance
1. Sliding/tilting glass panel can be installed on most models as an optional extra. This panel is controlled by a crank handle. After pressing the release...
1. Sliding/tilting glass panel can be installed on most models as an optional extra. This panel is controlled by a crank handle. After pressing the release...
Hatch Cover (Sliding/Tilting Type) — Replacement of Engines on-site
Figure 11.70. Detailed view of sliding/tilting hatch cover components 1. Glass panel; 1a. Clamp; 2. Rubber seal; 3. Sun visor; 4. Gasket; 5. Wind reflector; 6....
Figure 11.70. Detailed view of sliding/tilting hatch cover components 1. Glass panel; 1a. Clamp; 2. Rubber seal; 3. Sun visor; 4. Gasket; 5. Wind reflector; 6....
Sunroof (sliding/tilting type) — removal and installation (entire structure)
1. Disconnect the battery ground cable. 2. Remove the glass panel as described in Section 49 . 3. Remove the crank handle and its back plate. 4. Remove the...
1. Disconnect the battery ground cable. 2. Remove the glass panel as described in Section 49 . 3. Remove the crank handle and its back plate. 4. Remove the...
Sunroof (sliding/tilting type) — replacement of parts (with the structure removed from the vehicle)
1. The sunroof assembly must be removed as described in Section 50 before replacing the following parts. Active cables 2. Active cables should always be...
1. The sunroof assembly must be removed as described in Section 50 before replacing the following parts. Active cables 2. Active cables should always be...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
See similar ones from other Opel car manuals:
▶ Body: Doors and windows Opel Astra J (2009-2015, petrol)
▶ Body: Doors and windows Opel Corsa B (1993-2000)
▶ Body: Doors and windows Opel Kadett D (1979-1984)
▶ Body: Side doors Opel Zafira A (1999-2005, petrol)
▶ Body: Doors and windows Opel Omega B (1993-1999)
▶ Body: Doors and windows Opel Astra J (2009-2015, petrol)
▶ Body: Doors and windows Opel Corsa B (1993-2000)
▶ Body: Doors and windows Opel Kadett D (1979-1984)
▶ Body: Side doors Opel Zafira A (1999-2005, petrol)
▶ Body: Doors and windows Opel Omega B (1993-1999)
Share information:
- General information
- User manual
- Power unit
- Petrol engine F4R
- Diesel engine F9Q
- Diesel engine G9U
- Transmission
- Clutch and drive shafts
- Manual gearbox
- Chassis
- Front suspension
- Rear suspension
- Brake system
- Body
- Exterior
- Interior
- Electrical equipment
- Heating and ventilation
- Air conditioner
- Equipment and devices
- Electrical diagrams
- General information
- Maintenance
- Power unit
- Gasoline engines
- Diesel engines
- Cooling system
- Fuel and exhaust system
- Contact ignition system
- Contactless ignition system
- Transmission
- Clutch
- Mechanical gearbox
- Automatic gearbox
- Drive shafts
- Chassis
- Steering
- Brake system
- Car suspension
- Body
- Exterior
- Interior
- Doors and windows
- Electrical equipment
- Equipment and devices
- Power devices
- Electrical circuits
- General information
- User manual
- Maintenance
- Power unit
- Petrol engines 2.2 l
- Petrol engines 3.2 l
- Diesel engines 2.2 l
- Cooling system
- Fuel system (petrol)
- Fuel system (diesel)
- Ignition system
- Transmission
- Clutch
- Manual gearbox MUA5C
- Automatic gearbox 4L30E
- Chassis
- Suspension and axles
- Steering
- Brake system
- Body
- Exterior
- Interior
- Doors, locks and windows
- Heating and air conditioning
- Electrical equipment
- Power devices
- Equipment and devices
- Lighting and signaling
- Electrical diagrams
- General information
- Introduction to guide
- User manual
- Maintenance
- Power unit
- Engine repair
- Lubrication system
- Cooling system
- Power and exhaust system
- Engine electrics
- Transmission
- Clutch
- Mechanical gearbox
- Cardan shafts
- Chassis
- Brake system
- Front suspension
- Rear suspension
- Steering
- Body
- Repair and care
- Electrical equipment
- Equipment and devices
- Electrical circuits
