Doors, locks and windows of the car Opel Vectra C

Removal, installation and adjustment of the trunk lid (Sedan)
Removal 1. Open the trunk lid and remove the lid trim ( see Section 12 ). 2. Disconnect the high-level brake light wiring connectors (central) and single lock...

Removal and installation trunk lid trim (Sedan)
1. Open the trunk lid and use a special tool (for example, Hazet 799-3) remove 13 plugs from the lid trim (see accompanying illustration). 12.1 Fastenings of...

Removal, installation and adjustment of the trunk lid (Hatchback/Station wagon/Signum)
Removal and installation 1. Disconnect the cable from the negative terminal of the battery ( see Chapter 5 ). 2. Remove the rear door trim ( see Section 15 )....

Trunk lid trim (Hatchback/Station wagon/Signum)
Hatchback Models (GTC) 1. Open the tailgate and remove the luggage compartment shelf. 2. Remove the decorative covers on the left and right sides of the rear...

Removal and installation the trunk lid / tailgate lock
1. Disconnect the cable from the negative terminal of the battery ( see Chapter 5 ). 2. Remove the trunk lid trim ( see Section 12 ) / tailgate ( see Section...

Removal, installation and adjustment of side doors
Note: This section describes the removal/installation/adjustment procedure using the front as an example (driver's) side door. The corresponding operations for...

Removal and installation side door locks
1. Disconnect the cable from the negative terminal of the battery ( see Chapter 5 ). 2. Remove the trim of the corresponding door ( see Section 19 ). 3....

Removal and installation external side door handles
1. Open the door. 2. Using a plastic wedge, remove the hole plug on the rear end wall of the door, pull the outer handle away from the door and turn the lock...

Removal and installation front or rear door trim
Note: This section provides a detailed description of the procedure for removing/installing the trim using the front as an example (driver's) side door. For...

Removal and installation the rear door window lift handle
1. To facilitate subsequent installation, mark the position of the window lift handle with tape when the window is closed. 2. Window lifter handle (with...

Removal and installation triangular door trims
1. The procedure for removing the rear door triangle trim (Hatchback (GTS) models) is described in Section 19 (see illustration 19.10). 2. To remove the...

Removal and installation the front door window regulator
1. Lower the glass of the corresponding door by approximately 5 cm and secure it in this position using tape. 2. Disconnect the cable from the negative...

Removal and installation the rear door window regulator
1. Depending on the configuration, the rear doors can be equipped with either an electric or mechanical window lift. 2. Before removing the electric window,...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: