Steering Specifications steering type (all models) - Rack and pinion steering. On certain models, the power steering is installed as standard, on the rest it can be installed by order...
Steering wheel — removal and installation Note: This action will require a two-legged puller. Warning: If your model is equipped with an air bag, read the warning in Section 12 before you start...
Steering wheel — centering 1. In the driving position straight ahead, the distance between the center of the connecting plate of the tie rod mounting bolts: the steering gear and the...
Steering column — removal and installation Note: A bolt extractor is required. When installing the steering column, use a new shear bolt and (where applicable) new self-locking nut. Please note that on...
Steering column — bulkhead Fixed steering column Bulkhead 1. If the steering column has not yet been removed from the vehicle, proceed as described in paragraphs 1-11 Chapter 33 . 2....
Steering damper — removal and installation Removing 1. Some models are equipped with a steering damper installed between the rack and steering gear housing. 2. Remove the mounting nut from the moving...
Steering gear guards — replacement Note: New guard retaining brackets will be required for installation. 1. Remove the steering gear as described in Chapter 37 or Chapter 39 , depending on the...
Power steering hydraulic line — bleeding 1. Fill the tank to the mark "MAX" on the dipstick (engine off), installed in the tank filler cap. 2. Start the engine and bring the fluid level up to the mark...
Power steering pump — removal and installation Note: When installing, use a new o-ring for the hydraulic tube connector. Models 1.6 l (until 1992) Removing 1. Remove the air filter housing installed near...
Tie rod end — removal and installation Note: This procedure will require a ball joint puller. When installing, use a new self-locking tie-rod end ball joint nut. Removing 1. Where applicable, remove...
Tie rod — removal and installation Note: When installing, use a new tie rod-to-steering gear bolt adapter plate and, where applicable, a new tie-rod end self-locking ball joint nut. If the tie...
Front Wheel Alignment — General Specifications 1. Accurate front wheel alignment is essential for effective steering and even tire wear Before making any checks or adjustments, make sure the tires are...