The interior and interior of the car Opel Vectra A
Removal and installation of a covering of a door Vectra/Calibra cars Removing Unhook the triangular cover at the mirror attachment point. With a wide spatula, pry up and remove the door handle trim. Vectra...
Removing and installing a pocket on the front door Vectra/Calibra cars Removing Remove door trim. Loosen the three screws securing the pocket on the back of the door inner trim. Remove button (see left arrow)...
Removal and installation of armrests Vectra/Calibra cars Removing Remove door trim. Vectra vehicles: remove four screws (in Calibra cars - three) securing the armrest on the rear side of the door...
Removal and installation of glass doors Cars Removing Remove door trim. Remove protective film. Be careful not to tear it. Fully lower the glass. Press out pads and guides. Remove the rear glass...
Removal and installation of windows Cars Removing Remove door trim. Remove protective film. Be careful not to tear it. Lower the glass halfway and secure it in this position with two plastic...
Removal and installation of the door handle Vectra/Calibra cars Removing Remove door trim. Peel off the protective film around the door handle. Be careful not to tear the film. Loosen two nuts 1 (see...
Removal and installation of the door lock cylinder Vectra/Calibra cars Removing Remove door handle. Attention! Before removing the lock cylinder, insert the key into the lock. Remove retaining ring. Remove...
Removal and installation of the door lock Vectra/Calibra cars Removing Remove door trim. Remove protective film. Be careful not to tear it. Unhook the lock rods in the door. Remove lock. This will...
Adjustment of electric drives of the central lock The adjustment of the electric drives of the central lock must be carried out in case of violations of the operation of the central lock or the burglar alarm....
Removal and installation of an internal mirror Vectra/Calibra cars Removing Tilt the mirror up by the leg. Loosen the clamping screw with a 2 mm Allen key. Remove the mirror bracket from the support...