Vectra cars
Removal
Unfasten the parking brake handle cover by pressing it from behind with a narrow screwdriver.
Unscrew two screws under the cover, one on the front right side and two on the back left side.
Apply the parking brake.
Loosen and remove the protective leather cover from the parking brake handle.
Pull the cassette box up by unscrewing the screw through the hole.
In case of electric window: release the connector by folding back the retaining bar.
Pull back and remove the console. Pulling out the console also disconnects the power window connector.
Installation
Push the console from the rear, making sure the connector fits into the socket.
Secure the connector retaining plate.
Correct the position of the console and secure it with three screws.
Place the protective leather cover over the parking brake handle and connect it to the console.
Place and snap the handle cover into place.
Visitor comments