Specifications Wheel alignment Front wheels: Camber angle - 1°05' ± 45' Maximum difference between sides 1° Longitudinal angle of inclination of the kingpin (not regulated):...
Swivel fists — removal and installation Warning! When installing the steering knuckle, all new bolts and nuts must be used. Hub and steering knuckle Removing 1. Raise the front of the car and secure...
Replacing the front wheel bearings 1. Remove the steering knuckle. 2. To remove the hub from the steering knuckle, use a press and a tubular mandrel of the appropriate diameter. 3. Install the...
Front lower frame — removal and installation The location of the front side bolt of the lower frame Removing 1. Set the wheels to drive straight ahead. 2. Inside the car, unscrew the bolt that secures the...
A forward rack — removal, repair and installation A-pillar parts Removing 1. Raise the front of the car and secure it on stands. Remove the corresponding front wheel. 2. Unscrew the nut and disconnect the...
Stabilizer bar of the front suspension Front anti-roll bar Removing 1. Remove the front lower frame. 2. Unscrew nuts of fastening of drafts of the stabilizer of cross-section stability to a forward...
Lower arm front suspension Lower arm front suspension Removing 1. Raise the front of the car and secure it on stands. Remove the front wheel. 2. Remove the clamp bolt securing the lower...
Replacing the lower hinge of the front suspension 1. Remove the lower front suspension arm. 2. Using a 12mm drill, drill out the three rivets that secure the ball joint to the lower arm. 3. Install a new ball...
Rear hub — removal and installation Removing 1. Remove the rear brake drum or brake disc. 2. Disconnect the wheel speed sensor wires from the rear beam. 3. Support the rear brake shield and hub,...
Rear pillar — removal, repair and installation rear pillar Removing 1. Raise the rear of the car and secure it on stands. Remove the corresponding rear wheel. Install the rear beam on the stand. 2. Remove...
Stabilizer bar of the rear suspension Rear suspension stabilizer Removing 1. Raise the rear of the car and secure it on stands. Remove rear wheels. 2. Unscrew bolts of fastening of drafts of the...