Rear suspension anti-roll bar (Opel Vectra B)

Rear suspension stabilizer

Removal

1. Raise the rear of the car and secure it on stands. Remove the rear wheels.

2. Unscrew the bolts securing the stabilizer rods to the rear beam.



3. Remove the nuts securing the stabilizer bar clamps to the rear beam. Then tilt the stabilizer bar and remove it from under the car.

4. Remove the stabilizer mounting clamps.

5. Unscrew the rods from the stabilizer.

6. Remove the rubber pads from the stabilizer.

Installation

Installation is performed in the reverse order of removal. Tighten the stabilizer mounting bolts and nuts after installing the car on the wheels.