Removal and installation triangular door trims (Opel Vectra C)

1. The procedure for removing the rear door triangle trim (Hatchback (GTS) models) is described in Section 19 (see illustration 19.10).

2. To remove the triangular trim of the front door, first remove the trim of the corresponding door (see Section 19).

3. Insert the plastic wedge (for example, Hazet 1965-20) from above into the gap between the door frame and the triangular trim (see accompanying illustration). Press down the 3 fasteners and separate the cover from the frame.



4. Disconnect the speaker wiring harness from the back of the triangular cover, disconnect the wiring connector and remove the cover.

5. Installation is carried out in the reverse order of removal.