Drive Shafts — Specifications The type is open tubular with a homokinetic hinge at each end. Drive shaft joint lubrication specification - GM grease 19 41 521 (Duckhams LBM 10). Torque...
Description and maintenance The drive shafts are of the open type, having a homokinetic joint at each end. The right-hand shaft is longer than the left-hand shaft. Maintenance consists of...
Drive shaft — removal and installation 1. Raise the front of the machine and support it securely. 2. Remove the front wheel. 3. Remove the cotter pin from the gear nut or nut retainer at the end of...
Drive shaft joint — bellows replacement 1. Remove the drive shaft as indicated in the previous Section, then remove the retaining rings and remove the bellows from the hinge (photo). Photo 3.1...
Drive shaft joint — replacement 1. A worn drive shaft joint cannot be repaired and must be replaced entirely. Remove the drive shaft ( Section 2 ). 2. Release the locking strip and remove the...
Troubleshooting — Drive Shafts Symptom/Cause/s/. Vibration/ The drive shaft is bent. The universal joint is worn. Wheels are unbalanced. There is a sound when starting off "clonk"/ Universal...