Suspension and steering specifications Note. Separate characteristics are also given in the text of the Chapter. Front suspension 5-speed manual transmission, all forward gears synchronized Type...
Removal and installation of a torsion bar To carry out the work described below, raise the car from the front and place it on stands. For correct installation of the torsion bar, it is necessary to...
Removal and installation of shock absorbers Removing 1. Before removing the shock absorber, find out if it is hydraulic or gas-filled. 2. Before removing the shock absorber, it is necessary to raise the...
Removal and installation of the stabilizer bar Removing When carrying out the work described below, a distinction should be made between vehicles up to mid-1995 and later models. Vehicles up to mid-1995...
Removal and installation of the ball joint Removing 1. Place a garage lift under the lower control arm and support the suspension. 2. Disconnect the ball joint from the top side. 3. Disconnect the ball...
Removal and installation of a rotary fist Many of the tasks listed below have already been described and must be carried out in accordance with the instructions given. Like many parts of the front...
Front axle — removal, installation and repair To carry out the work described below, raise and place the front of the vehicle on stands. Mark the position of the wheels relative to the hubs and remove the...
Inspection and adjustment work on the car Below is a description of the inspection and adjustment work carried out on the front suspension. Camber, caster, toe and clearance check Before carrying out...