Description of the design of the front suspension The front suspension is independent, with telescopic shock absorber struts, wishbones and a torsion-type anti-roll bar. The front suspension strut consists of...
Front suspension — check of technical condition Checking the technical condition of the front suspension must be carried out in accordance with the periodic maintenance schedule (see « Periodic maintenance...
Ball joint — replacement We replace the ball joint if the check of the technical condition of the front suspension (see « Front suspension - check of technical condition ») found it to...
Front anti-roll bar — strut replacement To complete the work you will need: car stand; jack; anti-recoil stops. Execution sequence 1. We prepare the car for work (see « Preparing the car for...
Front suspension arm — replacement To complete the work you will need: car stand; jack; anti-recoil stops. Execution sequence 1. We prepare the car for work (see « Preparing the car for...
Front suspension strut — removal and installation Warning! Shock absorber struts and springs should be replaced in pairs, even if one is defective. To complete the work you will need: car stand; jack; special...
Front suspension strut — repair If checking the condition of the front suspension (see « Front suspension - check of technical condition ») detected a malfunction of any element of the rack,...
Front suspension subframe — removal and installation Removing the subframe is necessary to replace the steering gear, cushions and front anti-roll bar bar. To perform the work, an inspection ditch or overpass is...