Clutch — reference data Table 10.1.1. Basic data for control, maintenance and repair Table 10.1.2. Tightening torques for threaded connections
Clutch — design description The car is equipped with a dry-type single-disk clutch with a central pressure diaphragm spring. The clutch release drive is hydraulic. The clutch consists of...
Clutch — condition check Clutch life depends on operating conditions and driving style. Operation of the car with a maximum load or off-road, towing a trailer, incomplete engagement of...
Clutch Release Hydraulic — Bleeding Bleeding should be carried out after any repair of the clutch hydraulic drive, which led to a violation of its tightness, as well as when removing the gearbox....
Clutch Release Master Cylinder — Replace The need to perform this operation must be determined during the inspection of the technical condition of the clutch (see « Clutch - condition check »)....
Clutch release slave cylinder — check and replace Performing this operation requires a lot of effort and time, so we recommend that you perform it only if there are signs of a malfunction of the clutch release...
Clutch — check and replace Performing this operation requires a lot of effort and time, so the need to perform this operation should be determined during the inspection of the technical...