Car body exterior Opel Zafira A (petrol)

Radiator grille — removal and installation
Sequence of execution 1. Prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Using a Phillips screwdriver, unscrew the six...

Hood lock — replacement and adjustment
The hood lock consists of a locking spring installed in the frame of the front panel shield and a guide latch installed on the hood. The locking spring holds...

Hood Lock Drive Handle — Replacement
Sequence of execution 1. Prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Remove the lower trim of the instrument panel (see...

Bonnet Lock Drive Cable — Replacement
The drive cable is replaced as a complete assembly with the drive handle and its bracket. Sequence of execution 1. Prepare the car for work (see " Preparing...

Front fender liner — removal and installation
Note: The operation is shown on the example of the left mudguard. Removal of the right mudguard is carried out in a similar way. Sequence of execution 1....

Front bumper — replacement
The front bumper consists of a decorative overlay and a reinforcement. As a rule, only the outer decorative overlay breaks from a slight impact, which can be...

Astra Front Fender — Replacement
Note: The operation is shown using the left wing as an example. Replacing the right wing is done in a similar way. Sequence of execution 1. Prepare the car for...

Zafira Front Fender — Replacement
Note: The operation is shown using the example of replacing the left wing. Replacing the right wing is performed similarly. Sequence of execution 1. Prepare...

Fuel filler cap — removal and installation
When choosing paint for a car, it is useful to have some part painted in the same color as the paint code. The fuel filler cap is ideal for this purpose (if it...

Astra model rear bumper — replacement
The rear bumper consists of a decorative overlay and a reinforcement. As a rule, only the outer decorative overlay breaks from a light impact, which can be...

Zafira rear bumper — replacement
The rear bumper consists of a decorative overlay and a reinforcement. As a rule, only the outer decorative overlay breaks from a light impact, which can be...

Gas struts for the tailgate — replacement
If the tailgate does not stay open, its gas struts must be replaced. Sequence of execution 1. Prepare the car for work (see " Preparing the car for maintenance...

Astra model trunk door trim — removal and installation
The trim of the luggage compartment door must be removed to replace the door lock, its switch (cylinder) and electric locking drive, rear window wiper...

Zafira tailgate trim — removal and installation
The trim of the luggage compartment door must be removed to replace the door lock, its switch (cylinder) and electric locking drive, rear window wiper...

Tailgate Lock Switch (Cylinder) — Replacement
Note: The work is shown on the example of replacing the switch of the Astra model. On the Zafira model, the operation is performed similarly. Sequence of...

Tailgate Lock — Replacement and Adjustment
Replacing the lock on the Astra model 1. Prepare the car for work (see " Preparing the car for maintenance and repair "), 2. Remove the trim of the luggage...

Electric drive for locking the luggage compartment door — replacement
Note: The work is shown on the Astra model. On the Zafira model, the operation is performed similarly. Sequence of execution 1. Prepare the car for work (see "...

Windshield — Replacement
To complete the work you will need: glass bonding kit; sharp knife; glue gun; glue-sealant cutting string; a heated room in which the car can be left...

Front door glass — replacement
Note: The work is shown on the Astra model with a three-door hatchback body. On other models, the operation is performed similarly. Sequence of execution 1....

Rear Door Glass — Replacement
Note: The work is shown on the Zafira model. On the Astra model, the operation is performed similarly. Sequence of execution 1. Prepare the car for work (see "...

Rear side window model Astra — replacement
The Astra model with a three-door hatchback body has a fixed glass in the rear part of the body side, secured with nuts. Therefore, if necessary, it is quite...

Front side glass model Zafira — replacement
The Zafira model has a fixed glass in the front pillar of the body, which is secured with nuts. Therefore, replacing it yourself is quite simple. Note: The...

Installing engine crankcase protection
Considering the design features of the car and Russian operating conditions, we recommend installing engine crankcase protection if this has not been done...

Mudguards — removal and installation
Front mudguard Note: The work is shown on the example of removing and installing the left front mudguard. Removing the right mudguard is done in a similar way....

Decorative door sill trim for Astra model — removal and installation
The decorative threshold trim must be removed to replace the front wing, as well as to replace it in the event of mechanical damage. Sequence of execution...

Decorative trim for tailgate — replacement
Sequence of execution 1. Prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Remove the trunk lid trim (see " Astra model trunk...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: