Execution sequence
1. We prepare the car for work (see «Preparing the car for maintenance and repair»).
2. If installed, remove the rear mudguards (see «Mudguards - removal and installation»).
3. Remove the rear lights (see «Rear light model Astra - removal and installation»).
4. Using the TORX T20 key, we unscrew the three bolts of the lower fastening of the bumper lining.
5. With the same key, unscrew the bolt of the front fastening of the rear bumper lining on the left and similarly on the right side.
6. Using the same wrench, unscrew the bolts securing the bumper lining under the rear lights on the left and similarly on the right side.
7. We turn away three bolts of the top fastening of a lining of a bumper.
8. Carefully, trying not to damage the paint, remove the rear bumper cover assembly with the amplifier.
9. We remove the amplifier from the overlay.
10. If necessary, use a 10 mm drill to drill out the rivets and remove the shock buffer.
11. Similarly, remove the side brackets by drilling out two side...
...and two rear rivets.
12. Install the parts in reverse order.
Visitor comments