Note: The operation is shown using the left wing as an example. Replacing the right wing is done in a similar way.
Sequence of execution
1. Prepare the car for work (see "Preparing the car for maintenance and repair").
2. Remove the mudguard (see "Front fender liner - removal and installation").
3. Remove the decorative threshold trim (see "Decorative threshold trim - removal and installation").
4. Using a 10 mm wrench, unscrew the lower bolt of the rear wing mount.
5. Open the front door and use a 10 mm socket wrench with an extension to unscrew the upper bolt of the rear wing mount.
6. Move the side part of the bumper cover down and use a 10 mm socket wrench to unscrew the two bolts of the front wing mount.
Recommendation: To make the operation easier, it is better to completely remove the front bumper cover (see "Front bumper - replacement").
7. Pull up and remove the rubber hood buffer.
Text copied from an online resource (www.opelbook.ru)
8. Using a 10 mm wrench, unscrew the four bolts of the upper wing mount.
9. Carefully, trying not to scratch the paint, remove the wing from the car.
10. Install the parts in reverse order.
Visitor comments