Comment. The operation is shown on the example of the left fender liner. Removal of the right fender liner is carried out in the same way.
Execution sequence
1. We prepare the car for work (see «Preparing the car for maintenance and repair»).
2. Remove the front wheel (see «Wheel - replacement») and, if installed, the front mudguard (see «Mudguards - removal and installation»).
Warning! All fender liner holders are disposable and must be replaced after removal.
3. Remove the two rear fender liner holders (similar to removing the mudguard holder).
4. Similarly, remove the upper holder of the front fender liner.
5. We remove the two front holders 1 and use the TORX T20 key to unscrew the upper bolt 2 securing the front fender liner to the front bumper lining.
6. Using the TORX T20 key, unscrew the lower bolt securing the front fender liner to the front bumper lining.
7. Remove the front fender liner.
8. Install the parts in reverse order. We replace the holders with new ones.
Visitor comments