Contents: Sequence of execution ⬇ Installation ⬇
The trim of the luggage compartment door must be removed to replace the door lock, its switch (cylinder) and electric locking drive, rear window wiper motor-reducer.
Sequence of execution
1. Prepare the car for work (see "Preparing the car for maintenance and repair").
2. Using a thin slotted screwdriver, remove two plugs from the trunk door trim.

3. Using a TORX T20 key, unscrew two screws 1, and then four screws 2 on both sides of the trim.

4. Pulling down, remove the upholstery, overcoming the resistance of the holders.

Installation
We install the parts in reverse order.
Note: Before installation, check the integrity of the holders.
Replace the holders if necessary.
[Original source is on the website: OpelBook]



Visitor comments