Contents: Removal ⬇ Installation ⬇
Removal
Place the rear of the car on jack stands.
Unscrew the clamp, shine the pipe, See figure B3391.

Remove the muffler.
Installation
Install a new muffler.
Adjust the position of the pipe.
Secure the clamp.
Secure the rubber suspension by bending the metal tabs.
[Text was copied from the portal www.OpelBook.ru]
Note: Since 4/83, GTE cars have been equipped with a modified rear silencer suspension. The silencer is dated 04.3.
In cars with old suspension, at 2400 rpm, extraneous noises may occur in the muffler area. In such a case, it is necessary to install an additional clamp (OPEL #856293) at a distance of 110 cm from the edge of the front muffler to the middle of the clamp, looking in the direction of travel, to secure the rear muffler.

Visitor comments