Design and specifications Four- or five-speed transmission type «F16» with synchronizers in all forward gears. For vehicles with engine «16S» depending on the modification, a 4- or...
Removal and installation of a transmission Note. Removal and installation of gearbox shafts, as well as disassembly and assembly of the differential can be carried out without removing the gearbox....
Gearbox disassembly The following are only the features of disassembling the gearbox type «F16». Other operations are described in the section «Gearbox types «F10» And «F13» ....
The device of a 4-speed gearbox type «F16» Details of 4-speed transmission type «F16»: 1 - input shaft; 2 - a block of gears of the input shaft; 3 - secondary shaft; 4 — a fork of switching of I and II...
Differential disassembly Remove differential cover. Mark the position of the adjusting nut of the differential box bearing relative to the gearbox housing and, moving the differential...
Differential Assembly Remove dirt from the parts, check their condition and carefully lubricate with gearbox oil. Install the satellites into the differential box using the KM 160 4...
The device of the 5-speed gearbox type «F16» Details of 5-speed transmission type «F16»: 1 - input shaft; 2 - a block of gears of the input shaft; 3 - secondary shaft; 4 — a fork of switching of I and II...
Gearbox Assembly The following are only the assembly features of the gearbox type «F16» compared to gearbox «F10». Other operations are described in the section «Gearbox types...
Gearshift drive and differential gearbox type «F16» Parts of Gear Shift Drive and Differential Type Gear Box «F16»: 1 — the handle of the gear lever; 2 - protective cover; 3 - gearshift lever; 4 - body; 5 -...
Gearshift drive device type «F20» Parts of Gear Shift Drive Type «F20»: 1 - gearshift lever; 2 - hinge of the lever; 3 - body; 4 - latch reverse gear; 5 — draft of a drive of a gear change; 6 -...