Wheels and tires of the car Opel Kadett D
Wheel alignment angles
Optimal driving performance with minimal tire wear is only achieved with correct wheel installation. In case of abnormal wear, poor stability when driving...
Optimal driving performance with minimal tire wear is only achieved with correct wheel installation. In case of abnormal wear, poor stability when driving...
Negative toe-in adjustment
Adjustment is carried out on the stand. Set the steering gear to the center position. The exact middle position is reached when the control dimension A is 325...
Adjustment is carried out on the stand. Set the steering gear to the center position. The exact middle position is reached when the control dimension A is 325...
Parameter values for adjusting wheel alignment
Parameter values for adjusting wheel alignment Front suspension The rear suspension is not adjustable.
Parameter values for adjusting wheel alignment Front suspension The rear suspension is not adjustable.
Wheels and tires — general information
Depending on the model and version, the OPEL KADETT is equipped with tires and wheels of different sizes. All wheels have a press-in depth of 49 mm. The...
Depending on the model and version, the OPEL KADETT is equipped with tires and wheels of different sizes. All wheels have a press-in depth of 49 mm. The...
Wheel balancing
Balancing of serial wheels is carried out at the factory. Balancing is necessary to compensate for different weight distribution and material inaccuracies....
Balancing of serial wheels is carried out at the factory. Balancing is necessary to compensate for different weight distribution and material inaccuracies....
Wheel replacement
It is not recommended to change the wheel without special need. I advise driving until the front wheels approach the wear limit, then: Install new tires of the...
It is not recommended to change the wheel without special need. I advise driving until the front wheels approach the wear limit, then: Install new tires of the...
Tire wear
Tires of balanced wheels, with precise observance of the prescribed pressure, with error-free installation and with the correct operation of shock absorbers,...
Tires of balanced wheels, with precise observance of the prescribed pressure, with error-free installation and with the correct operation of shock absorbers,...
Anti-skid chains
The use of anti-skid chains is advisable only on the drive wheels (front). All models can only use fine-link chains that protrude no more than 15 mm above the...
The use of anti-skid chains is advisable only on the drive wheels (front). All models can only use fine-link chains that protrude no more than 15 mm above the...
Correct tire pressure (overpressure) in kPa (bar/atm)
Correct tire pressure (excess pressure) in kPa (bar/atm) *) SR only The data concerning the air pressure in the tyres apply to cold tyres. For a sporty driving...
Correct tire pressure (excess pressure) in kPa (bar/atm) *) SR only The data concerning the air pressure in the tyres apply to cold tyres. For a sporty driving...
Tyre defects
Tyre defects Wear Cause Severe wear on both sides of the working surface Insufficient pressure Severe wear in the middle of the working surface along the...
Tyre defects Wear Cause Severe wear on both sides of the working surface Insufficient pressure Severe wear in the middle of the working surface along the...
Abnormal tire wear
Uneven tire wear is in most cases a consequence of very low or high tire pressure, due to an error in wheel installation or imbalance, or due to faulty shock...
Uneven tire wear is in most cases a consequence of very low or high tire pressure, due to an error in wheel installation or imbalance, or due to faulty shock...
Running in new tires
New tires have a very smooth surface due to the technological process. Therefore, new tires need to be run in. During the running in, the smooth surface will...
New tires have a very smooth surface due to the technological process. Therefore, new tires need to be run in. During the running in, the smooth surface will...
Speed Limit Markings
The marking means that such a tire can be driven at a certain speed, and is located behind the tire size, for example, 165R13T. The letter T indicates that...
The marking means that such a tire can be driven at a certain speed, and is located behind the tire size, for example, 165R13T. The letter T indicates that...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Share information:
- General information
- Vehicle description
- Operation and maintenance
- OHV power unit
- Engine design
- Check and repair
- Engine work
- OHC power unit
- Engine design
- Engine repair
- Ignition system
- Cooling and lubrication
- Supply system
- Fuel injection «LE-Jetronic»
- Fuel injection «LE3-Jetronic»
- Motronic ML4.1 system
- Motronic M1.5 system
- Motronic M2.5 system
- Transmission
- Clutch
- Gearbox F10 and F13
- Gearbox F16 and F20
- Automatic gearbox
- Drive shafts
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Electrical equipment
- Equipment and devices
- Electrical circuits
- General information
- Car care
- Maintenance
- Power unit
- Gasoline engines
- Lubrication system
- Cooling system
- Power system (gasoline)
- Carburetor Solex 35 PDSI
- Carburetor Varajet II
- Carburetor 1B1
- Fuel injection (gasoline)
- Diesel engines
- Fuel system (diesel)
- Transmission
- Clutch
- Manual gearbox
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Wheels and tires
- Body
- Body elements
- Doors and windows
- Electrical equipment
- Equipment and devices
- Lighting system
- Power devices
- Ignition system
- Electrical circuits