Design and specifications On parts of cars with engine models «13N», «13S», «16S», a US-made Hydramatic hydromechanical gearbox is installed, consisting of an automatic three-stage...
Gearbox Specifications Clutches *Vehicles with engines «13N», «13S». **Vehicles with engine «16S». Band brake piston marking: cars with engine «13N»: 1; cars with engine «13S»: 1;...
Technical characteristics of transmission oil Oil used: Dexron automatic transmission oil «IN» or «D». The total capacity of the gearbox and torque converter, l: 9. The amount of oil to be filled in after...
Design features and principle of operation The TNM125 hydromechanical gearbox is designed specifically for front-wheel drive vehicles with a transverse engine. It consists of a torque converter, three...
Torque converter The torque converter works like a hydraulic clutch and is designed to hydraulically transfer the engine torque to the gearbox. It performs the function of...
Planetary gear In automatic transmissions, the planetary gear is the main element in converting engine torque. It provides a constant and silent engagement, takes up little...
Clutches A multi-plate clutch consists of friction-lined discs and steel discs, a hub, a drum or a gearbox housing, depending on whether the rotating element is engaged...
Band brake The belt brake is used to block the housing, drum and sun gears of the direct clutch. The brake band is attached to the gearbox housing and actuated by a...
Freewheel clutch The roller freewheel only transmits rotation in one direction. It consists of a splined hub driven by the 1st gear and reverse clutch housing, and an outer cam...
Output planetary gear The output planetary gear includes a differential box and an internal ring gear, which is mounted on splines in the gearbox housing and is partially mounted on...
Removing the hydromechanical gearbox Disconnect and remove the battery. Remove air filter. Unscrew the fastening bolt and disconnect the jumper from the gearbox housing on «mass». Loosen the...
Oil pressure check Check the oil level and, if necessary, add oil through the dipstick tube. Unscrew the plug and screw the KM 232 adapter with a pressure gauge into the hole...
Forced Reverse Cable Adjustment Disable the forced reverse shift cable tension adjustment mechanism using the hook (see photo). Press the accelerator pedal all the way down. If it is...
Removal and installation of a chain of a drive To remove and install the gearbox drive target, it is necessary to remove the gearbox from the vehicle Removing Remove the cover of the valve box - oil pump...
Checking the band brake Remove oil sump. Remove oil filter and o-ring. Remove the band brake servo cover along with the gasket. Remove and disassemble the band brake servo. Remove...