1. Raise and secure the vehicle.
2. Make sure the vehicle is level.
3. Check rear axle for oil leaks. Eliminate the found faults.
4. Clean the area around the filler plugs (1) and drain (2) holes.
5. Unscrew the filler plug (1).
6. Unscrew the drain plug (2) and drain the oil from the main gear housing.
7. Tighten the drain plug (2) torque 25 Nm.
8. Pour the specified type of hydraulic fluid into the filler hole until it starts to flow out of the filler hole.
9. Tighten the filler plug to 25 Nm.
Visitor comments