Car engine lubrication system Opel Insignia A

Lubrication system of gasoline engines
Engines 1.6/1.8/2.0 l Oil is supplied under pressure to the crankshaft, connecting rods, phase shifters, camshaft bearings and valve lifters. All other moving...

Diesel engine lubrication system
The lubrication system includes a metal oil pan with an oil intake, which is bolted to the oil pump body and sealed with a gasket. The oil pump is mounted at...

Checking oil pressure — 1.6 and 1.8L petrol engines
1. Remove the bolt from the hole in the cylinder head (1). 2. Clean the threads. 3. Install the EN-498-B pressure gauge (2) with the EN-232 adapter (1). Note:...

Checking Oil Pressure — 2.0L and 2.8L Petrol Engines
1. Place the vehicle on a level surface and allow the engine oil to drain into the pan for two to three minutes, then check the engine oil level. 2. Add engine...

Checking Oil Pressure — 2.0L Diesel Engines
1. Place the car on a level surface and allow the engine oil to flow into the engine sump for 2-3 minutes, then check the oil level. If necessary, top up the...

Oil filter replacement — 1.6 and 1.8L petrol engines
Removal 1. Open the hood. 2. Place an oil collection pan under the engine. 3. Remove the oil filter cover (1). 4. Remove the oil filter cover seal (2). 5....

Oil Filter Replacement — 2.0L Petrol Engines
Removal 1. Remove the engine side screen. 2. Using the special EN-44887 key, unscrew the oil filter cover (1). Note: Replace the O-rings (2) with new ones. 3....

Oil Filter Replacement — 2.0L Diesel Engines
Removal 1. Remove the oil filter cover (1). Note: Do not use an open-end wrench on the hexagon of the oil filter cover. 2. Remove the seal (2). 3. Remove the...

Oil Filter Replacement — 2.8L Petrol Engine
Removal 1. Using a special key, unscrew the oil filter cover. 2. Remove the oil filter cover seal. 3. Remove and dispose of the oil filter insert properly....

Oil pan replacement — 1.6 and 1.8L petrol engines
Removal 1. Open the hood. 2. Raise and secure the vehicle. 3. Place a drain pan under the engine. 4. Unscrew the oil drain plug. 5. Drain the engine oil into...

Oil Pan Replacement — 2.0L Petrol Engines
Removal 1. Remove the oil dipstick with the guide pipe. 2. Remove the air conditioning compressor. 3. Remove the air conditioning compressor bracket. 4. Remove...

Oil Pan Replacement — 2.0L Diesel Engines
Removal 1. Open the hood. 2. Raise and secure the vehicle. 3. Remove the insulating covering from the engine compartment. 4. Remove the front exhaust pipe. 5....

Oil Pan Replacement — 2.8L Petrol Engine
Removal 1. Drain the engine oil. 2. Remove the front engine cover. 3. Remove the oil filter adapter. 4. Loosen the air conditioning compressor mounting bolts...

Specification
Petrol engines Diesel engines

Special tools and accessories
See the similar section of the corresponding chapter "Mechanical part of the engine" (chapters 6a , 6b , 6s and 6d ).

Operating materials
See the similar section of the corresponding chapter "Mechanical part of the engine" (chapters 6a , 6b , 6s and 6d ).

Tightening torques for threaded connections
Petrol engines 1.6 and 1.8 l Petrol engines 2.0 l Diesel engines 2.0 l 2.8L petrol engine

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: