2. Clean the thread.
3. Install pressure gauge EN-498-B (2) with EN-232 adapter (1).
Note. The oil temperature should be 80-100°C, i.e. the engine must be warmed up to operating temperature.
4. Start the engine and check the oil pressure. At idle, the oil pressure should be 130 kPa.
5. Turn off the engine.
6. Remove pressure gauge EN-498-B (2) with EN-232 adapter (1).
7. Install a new bolt in the hole in the cylinder head.
8. Tighten the bolt to 15 Nm.
9. Check the engine oil level with the dipstick.
Visitor comments