Passive vehicle safety Opel Insignia A

General information
The car is equipped with front and rear seat belts, which provide primary safety for the driver and passengers. Seat belts help to keep the passenger inside...

Passive safety system device
1. Front impact sensor - located under the hood in the center of the car. 2. Hood strut - a pneumatic shock absorber located under the hood on the passenger...

Safety rules for working with seat belt pretensioners
1. Inspection, installation and repair work must be performed only by trained specialists. 2. The pyrotechnic charge has an unlimited shelf life and does not...

Safety precautions when working with airbags
1. Inspection, installation and repair work must be performed only by trained specialists. 2. Before working on the airbag system, disconnect the negative...

Replacing the contact disk
1. Remove the steering wheel. 2. Remove the steering column covers. 3. Unscrew the four mounting bolts (1) of the contact disk. 4. Disconnect all electrical...

Centering the steering airbag contact disc
Caution: The new contact disc must be centered. Incorrect centering of the contact disc may cause damage to it, which will cause malfunction of the driver's...

Deactivation and activation of the additional passive safety system
Servicing of supplemental passive restraint system components will vary depending on their location. There are several reasons for deactivating the...

Steering Wheel Airbag Module Replacement
Removal 1. Deactivate the additional passive safety system. 2. Using a screwdriver or similar tool with a total length (b) of 180 mm, make a special tool: bend...

Replacing the remaining system components
1. Deactivate the additional passive safety system. 2. Replace the required component, referring to the illustrations below. Front passenger front airbag: 1....

Disposal of passive safety elements
Before disposing of any airbags or pretensioners (including disposal of the entire vehicle) it is necessary to perform their disclosure. Only activated ones...

Special tools and accessories

Tightening torques for threaded connections

Cooling «quick check» procedure
Perform the following "manual" check procedure to ensure that the air conditioning system is properly charged with refrigerant. The air temperature should be...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

See similar ones from other Opel car manuals:
▶ Body: Security systems Opel Astra J (2009-2015, petrol)

Share information: