General information Manual transmission F32-6 Gearboxes M32-6 (1) and F40-6 - mechanical six-speed three-shaft with synchronization of all gears. Gearbox F17-5 - mechanical...
Transmission Neutral Position Sensor Calibration Note. The calibration procedure for the transmission neutral position sensor is required after the following work has been completed: Replacing the...
Replacing a manual transmission M32-6 Removing 1. Remove retainer (2) and remove the expansion tank (1). Note. Do not disconnect the coolant hoses. 2. Remove expansion tank (1) to the side. 3....
F40-6 Manual Transmission Replacement Removing 1. Remove the battery tray. 2. Remove retainer (2) and remove the expansion tank (1). Move the expansion tank to the side. Note. Do not disconnect the...
Gearshift mechanism device 1. Gear lever cables. 2. Gearshift housing. 3. Nut of an arm of shift cables (2 pcs.). 4. Washer bracket for shift cables (2 pcs.). 5. Bracket for shift cables.
Replacing the knob of the gear lever 1. Unhook the boot of the gear lever (1) from the floor console. 2. Press in two latches (arrows). 3. Slide the latch (2) shift lever up. 4. Remove the knob of...
Gear Lever Replacement 1. Remove the front floor console. 2. Unhook the adjusters (2) switch cables. 3. Unhook the cables (3) from gear lever housing (1). 4. Unscrew the fastening...
Replacing shift cables 1. Remove the shift lever. 2. Remove the battery tray. 3. Remove shift cables (2) from shift levers (3) using the demounting key DT-6042-A. 4. Remove shift...
Gear shift cable adjustment 1. Remove the mat (1). 2. Unhook the bottom center trim (2) instrument panel from the floor console using a suitable plastic tool (3). 3. Unhook the adjusting...