Attention! The filter element must not be cleaned with petrol or oil.
Removing
Depending on the design, unscrew either one nut in the center or three nuts on the air filter.
Depending on the version lying down, pull the edge of the lid outward and open it by hand without tools, or open the 6 metal clips.
Remove air filter cover.
Take out the filter element.
Thoroughly clean the filter housing while closing the inlet.
Knock out the filter element with the dirty side down, or replace it.
Installation
Insert the filter element, press down on the cover and fasten with brackets and bolts. When installing the cover, make sure that the spout on the cover fits into the groove on the outlet pipe.
Tighten the screws carefully.
Visitor comments