Contents: Fuel is supplied: ⬇ Fuel not supplied: ⬇
If there are any faults in the fuel supply, check the device in the following order.
Check if there is fuel in the tank.
Disconnect the fuel pump fuel hose from the carburetor, place the hose in a container. Crank the engine briefly with the starter and see if the fuel flows out in spurts.
Fuel is supplied:
If the float chamber is empty, the fuel pump pressure should be checked. This pressure should be between 0.2 and 0.35 boron at 2000 rpm.
Check the float needle valve.
Fuel not supplied:
Disconnect the fuel pump wires. If fuel leaks, check the fuel pump for leaks, remove, check, and clean if necessary.
(Material copied from this website: OPELBOOK)
If fuel does not flow out, blow out the fuel line, remove the fuel tank and clean it.
Visitor comments