Full service, every 30,000 km or 24 months.
Round type
1. Release the spring clips from the air filter cover.
2. Loosen and remove the small screw securing the extension (extension) covers to the main body.
3. Unscrew and remove the three central nuts securing the air filter to the carburetor, being careful not to damage the gaskets (see illustration).
4. Separate the cover from the main body, then remove the element (see illustration).
5. Wipe clean the inside surfaces of the cover and main body.
6. Place a new element in the air filter housing and install the cover.
Square type
7. To improve access, disconnect the coolant hose from the air filter cover.
8. Release the two brackets on the left side of the cover and remove the two screws on the right side, then lift the cover just enough to remove the element.
9. Wipe clean the inside surfaces of the cover and main body.
10. Installation is carried out in the reverse order.
Visitor comments