Full service, every 30,000 km or 24 months.
1. Remove the distributor cap and high voltage wires and wipe them clean.
2. Also wipe clean the ignition coil connections. Remove the distributor slider, then visually inspect the cover of the distributor breaker. Inspect the distributor runner and high voltage wires for cracks.
3. When installing the switch distributor cover, check that the ends of the high voltage wires are securely installed to the cover, spark plugs and ignition coil. Also make sure that the carbon brush in the center of the breaker-distributor cover moves freely.
4. Inspect the electrical and vacuum connections of the engine ignition control system and make sure they are clean and undamaged.
Visitor comments