Cooling and heating systems — general information Unscrewing the plug of the expansion tank (engine 2.0 l) Expansion tank of the engine 2.4 l The engine is equipped with a circulation cooling system. A vane...
Engine Cooling Specifications Note. Separate characteristics are also given in the text of the Chapter. Engine 2.4 l until the middle of 1995 release Design features Closed type, with...
Checking the radiator and radiator cap Expansion tank cap leak test Checking the cooling system for leaks The cooling system is under pressure. The plug of the expansion tank is under the influence...
Removal and installation of a radiator Before removing the radiator or fan, first disconnect the battery, as when the ignition is on, the fan's supply wires are energized. The fan is removed as...
Cooling fan replacement DOHC engine The parts to be removed are shown in fig. paragraph 5 (Removal and installation of a radiator). 1. Disconnect the motor plug connection. 2. Remove...
Coolant pump — removal and installation Removal and installation Engine 2.0 l OHC until the end of 1996 release 1. Drain the coolant (chapter Filling the cooling system cooler Chapters Ongoing care...
Replacing and tensioning the V-belt To drive units installed on the engine since 1995 of release (2.0 L OHC and DOHC) the so-called multi-ribbed V-belt is used. The belt tensions automatically....
Thermostat and thermostat housing Engine OHC 2.0 l To ensure warranty, the thermostat is only supplied with a drain plug, i.e. parts are replaced as a set. The thermostat is removed as follows:...