2. Unscrew the window latch.
3. Remove the window from its hinges.
4. The lock of such a window can be removed after drilling out the fastening of the support pin and pulling this pin out.
5. Remove the mounting plate from the glass.
6. Assembly and installation is carried out by performing the above steps in reverse order.
Figure 11.48. Unscrewing the mounting screw of the opening side window latch.The remaining screws are indicated by arrows
Figure 11.49. Drilling the support stud plug - indicated by arrow
Figure 11.50. Pull out the support pin in the direction indicated by the arrow
Figure 11.51. Unscrew the mounting plate from the glass - indicated by the arrow
Visitor comments