Car clutch repair Opel Astra G (petrol)

General information
The clutch consists of a slave (friction) disk, clutch housing with pressure plate and diaphragm spring and clutch release mechanism. The friction disk...

Clutch hydraulic drive — air removal
1. Remove the cap on the bleed nipple on the slave cylinder, put a hose on the nipple of the cylinder. Lower the other end of the hose into a container...

Clutch Master Cylinder — Removal and Installation
1. Remove the relay panel from the ABS valve block by bending the latches. Remove the panel bracket. 2. Disconnect the fluid supply hose from the cylinder and...

Clutch slave cylinder — removal and installation
1. Access to the working cylinder is provided only after removing the gearbox ( Chapter 7A ). 2. Disconnect the tube from the cylinder (see photo), unscrew 3...

Clutch pedal — removal and installation
1. Remove the trim in the driver's side footwell. Unpin and disconnect the clutch pedal from the clutch master cylinder rod by removing the axle (see photo)....

Clutch — removal, inspection and installation
Removal 1. Remove the gearbox ( Chapter 7A ). 2. Mark the position of the clutch on the flywheel. 3. Gradually, making ½ a turn at a time, unscrew the bolts in...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: