1. Remove the cap on the bleeder on the working cylinder, put a hose on the cylinder nipple. Dip the other end of the hose into a container partially filled with brake fluid.
2. Bring the fluid level in the reservoir to the MAX mark.
3. Loosen the bleed screw 1 turn. Have an assistant depress the clutch pedal all the way. Tighten the fitting after the fluid exits. Have an assistant release the pedal.
4. Repeat the procedure until no more air bubbles come out of the fluid hose. Constantly monitor the level - the tank must be filled with liquid.
5. With the pedal depressed, tighten the fitting, put a cap on the fitting and lower the car. Restore fluid level in reservoir.
Visitor comments