Diesel injection and turbocharging systems General information When a diesel engine is running, clean air is sucked into its cylinders, which is compressed to high pressure. In this case, the air...
Checking and adjusting the maximum engine speed The maximum engine speed is controlled by the ECM and cannot be adjusted by the vehicle owner. Below is a description of the speed check procedure, adjustment...
Removal and installation of injection pump Keep dirt out of the pump and fuel lines. Models 1.7L SOHC 1. Disconnect the negative cable from the battery. 2. Remove the pump drive gear (see chapter Engine...
Removal and installation of fuel injectors Take special care! Do not place your hands or other parts of your body under the nozzles! Do not allow dirt to enter the path of the power system! Remember...
Removal and installation of a turbocharger Removing 1. Remove exhaust manifold and turbocharger assembly (see Removal and installation of a final collector ). 2. Transfer the exhaust manifold with...
Removal and installation of the inlet pipeline Models 1.7L SOHC New pipe nuts are required during installation. 1. Disconnect the negative cable from the battery. 2. If necessary, remove the air cleaner...
Removal and installation of a final collector Models 1.7L SOHC Installation will require new manifold mounting nuts. 1. The exhaust manifold is removed as an assembly with the turbocharger. Engage the...