Vehicle drive shafts Opel Astra H

Specifications
Drive shafts Type - Open, unequal length, with constant velocity joints at both ends. CV joint grease type: Special Grease Vauxhall P/90094176. Tightening...

General information
1. From the side gears of the differential, the torque developed by the engine is transmitted to the front (driving) wheels via two drive shafts of unequal...

Removal and installation drive shafts
Removal Caution: When pulling the drive shaft journal out of the corresponding splined joint, the shaft must be pulled by the joint assembly - never by the...

Removal and installation the intermediate shaft
1. The intermediate shaft is designed to reduce the length of the right drive shaft, thereby eliminating the possibility of torsional vibrations of the shaft...

Checking the condition and replacing constant velocity joints (CV joints)
Examination 1. A clearly failed CV joint can be identified by characteristic impacts when the load changes, and also by ear by the characteristic clicking...

Replacing CV joint boots
Note: Since the inner tripod joint cannot be removed from the shaft, its boot is replaced from the outer end of the drive shaft, which requires first removing...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: