Specifications Overall dimensions, mm Note: All figures are approximate and may vary depending on the model. 1 Values are in meters Gap between adjacent body elements, mm...
Removal and installation of body linings (moldings) Side door trims 1. To remove the door molding, carefully pry off its edge with a plastic wedge, which is then inserted between the door and the molding....
Removal and installation of a lattice of a fairing 1. Remove wiper arms ( see chapter 12 ), disconnect and remove the rubber seal from the rear bulkhead of the engine compartment. 2. Raise the fairing grille...
Removal and installation of front fenders 1. Remove the headlight, side turn signal repeater ( see chapter 12 ) and wheel arch protection ( see Section 6 ) on the corresponding side of the vehicle. 2....
Removal, installation and adjustment of a cowl Removing 1. Open the hood and disconnect the gas-filled telescopic stop from it, for which slightly raise the locking bracket with a screwdriver and remove the...
Removal, installation and adjustment of the tailgate Removal and installation 1. Disconnect the wire from the negative terminal of the battery ( see chapter 5 ). 2. Open the tailgate and remove the luggage...
Removal, installation and adjustment of side doors Removal and installation 1. Disconnect the wire from the negative terminal of the battery ( see chapter 5 ). 2. Open the door and seal the edges of the door...
Removal and installation of side door locks 1. Disconnect the wire from the negative terminal of the battery ( see chapter 5 ). 2. Remove the door upholstery ( see Section 21 ). 3. On the front door,...
Removal and installation of a door rear-view mirror Astra models 1. Remove the front speaker cover ( see Section 21 ). 2. Disunite a socket of an electroconducting of a mirror. While holding the mirror out,...