1. Disconnect the wire from the negative terminal of the battery (see chapter 5).
2. Remove the door upholstery (see Section 21).
3. On the front door, remove the 2 fasteners at the back of the door frame (see illustration 23.3).
4. Remove the insulating film at the rear, disconnect the lock wiring connector.
5. Pull up the locking bracket and disconnect the door lock rod from the support (see resist. illustration).
6. Turn out 3 fixing bolts on a back face wall of a door and separate the lock from a frame of a door.
7. On a forward door disconnect draft of the cylinder of the door lock.
8. Remove the lock from the frame.
9 Release the flexible link from the door lock holder (see resist. illustration) and disconnect the rod core from the lock button pivot arm.
10. Installation is made in an order, the return to an order of removal. Don't forget to replace the insulating film. Without slamming the door, check the operation of the locking mechanism.
Visitor comments