Body design features Body car Opel Astra J type five-door hatchback, load-bearing structure, all-metal. The body frame includes the base, sidewalls, roof and parts interconnected...
Removal and installation of facing of a radiator The radiator cover consists of two parts, upper and lower, each of which can be removed separately. However, both parts are attached to the front bumper from...
Removal and installation of fender liner In the arches of the front and rear wheels, plastic fenders are installed that protect the body from the abrasive effects of sand and stones thrown by the...
Removal and installation of a forward bumper You will need: TORX T20 wrench, TORX E12 socket, flat-blade screwdriver, fine-nosed pliers. 1. Open the hood and place it on the stop. 2. Remove the crankcase...
Removal and installation of a back bumper You will need: end head «at 15», flat blade screwdriver. 1. Disconnect the wire from the terminal «minus» battery. 2. Remove the rear wheel arches (see Removal...
Removal and installation of a forward wing Removal of the left front fender is shown. The right wing is removed in the same way. You will need: end head «on 7», wrench or socket «on 10». 1. Remove...
Removal and installation of a cowl You will need: key «at 13», marker. Note. To avoid injury and damage to vehicle parts, remove the hood with an assistant. 1. Open the hood and place it on the...
Removal and installation of an external mirror You will need: end head «on 10», flat blade screwdriver. Note. Removal of the left outside mirror is shown. The right mirror is removed in the same way. 1....
Control body dimensions Pic. 1. Control dimensions of the engine compartment (front view) Pic. 2. Control dimensions of the engine compartment (view from above) Pic. 3. Control...