You will need: end head «on 7», wrench or socket «on 10».
1. Remove front..
2.... and the rear of the front wheel liner (see Removal and installation of fender liner).
3. Remove the side turn signal (see Side turn signal replacement).
4. Remove the front bumper (see Removal and installation of a forward bumper).
5. Turn out three bolts of forward fastening of a wing …
6.... and two bolts of the rear lower fastening to the threshold.
7. Open a forward door and turn out a bolt of a back top fastening of a wing.
8. Remove the left outer facing of the windshield, overcoming the elastic resistance of its clips.
9. Turn out a bolt of the top back fastening of a wing.
10. Remove the bolt A upper front fender mount and bolt B headlight mounts
11. Turn out a bolt of the top average fastening of a wing and remove a wing.
12. Install the parts in the reverse order of removal.
Visitor comments