2. First unscrew the shock absorber from the rack bracket in the center of the steering assembly and then separate it from the rack case. Remove the shock absorber.
3. Reassemble in the reverse order, but only tighten the spindle nut so as to maintain the distance (A) as shown in Fig. 8.14.
Pic. 8.14 Installing the steering shock absorber mounting nut - left side
4. The clamp should be installed as shown in Fig. 8.15 before tightening all bolts to the specified torque values.
Pic. 8.15 Position of the shock absorber clamp in relation to the rack housing - left side
Visitor comments