Contents: Removal ⬇ Installation ⬇
Removal
1. Place the vehicle on a two-post lift.
2. Disconnect the battery, starting with the negative cable.
3. Remove the engine guard and right side cover.
4. Turn the tensioner roller clockwise with a 13mm wrench to loosen the belt (figure 4.17). Lock the tension roller by inserting a 4mm Allen key into hole 1.
[Information taken from the website OpelBook.ru]
Figure 4.17. Lock the tension roller by inserting a 4 mm Allen key into hole 1.
5. Remove the belt.
Installation
6. Installation is carried out in the reverse order of removal.
Visitor comments