Auxiliary equipment drive belt (Opel Frontera B)

Removal

Release the clamps and remove the upper fan shroud from the radiator.

Tilt the tensioner pulley down to relieve tension on the accessory drive belt and remove the belt from the engine pulleys.

Accessory Drive Belt: 1 - tension mechanism pulley; 2 - idle pulley; 3 - fan pulley; 4 - poly V-belt; 5 - Power steering pump pulley; 6 - Air conditioning compressor pulley; 7 - crankshaft pulley; 8 - generator pulley

Installation

Tilt the tensioner pulley down and install the accessory drive belt onto the engine pulleys.

Install the upper fan shroud onto the radiator.

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Checking the article: Chernov Alexander

Share information:

Opel Frontera B: Petrol engines 3.2 l

Expansion air chamber
Checking and adjusting valve clearances
Checking and adjusting valve timing
Checking engine oil pressure
Measuring engine oil temperature
Checking the tightness of cylinders

Timing belt covers for gas distribution mechanism drive
Timing belt for gas distribution mechanism drive
Replacing the front camshaft oil seal
Camshafts
Exhaust manifold (left side)
Cylinder head

Link to this page in different formats

HTMLTextBB Code

Visitor comments

No comments yet