1. Remove the air cleaner (see section 4). Disconnect the negative battery cable.
2. Disconnect the fuel hose from the carburetor and plug its open end.
3. Disconnect the wiring from the automatic choke or disconnect the manual choke cable.
4. Disconnect the throttle valve drive mechanism at the ball joint. Disconnect the distributor vacuum hose and the air cleaner vacuum hose (see photo 10.1B).
5. Clamp the cooling system hoses coming from the rear of the carburetor (supply and return hoses).
6. Unscrew and remove the 4 nuts on the carburetor flange and remove the carburetor from the manifold.
7. Install the carburetor in the reverse order, replacing the flange gaskets with new ones.
Visitor comments