Engine and automatic transmission — connection before installation on the car (Opel Ascona C)

1. Check that the torque converter is fully inserted into the socket part of the crankcase (see chapter 6).

2. Place the gearbox on the engine so that the white mark on the drive disk aligns with the colored mark on the torque converter.

3. Install and tighten the bolts of the bell-shaped part of the crankcase.

4. Install new bolts connecting the drive disk to the torque converter, lock the starter ring gear and tighten the bolts to the required torque.

5. Install and secure the torque converter cover with bolts.

b. Install the starter.