Instruments — removal and installation (Opel Ascona C)

1. Once the instrument panel has been removed, the individual instruments and tools can be removed.

2. To do this, disconnect and remove the socket and the transparent screen from the front.

3. Loosen the mounting nuts and disconnect the devices from the printed circuit board.

Be careful not to damage the printed circuit board.

4. If the coolant temperature and fuel level sensors are not functioning properly at the same time, this may be caused by a faulty instrument voltage stabilizer. It can be replaced after unscrewing the fixing screw (see photo 27.4).



5. Install the tools in place by performing the above steps in reverse order.