2. Disconnect and remove the bulb holder (see photo 29.15V).
3. Rotate and remove the fog lamp socket.
4. Unscrew the four mounting nuts and remove the rear light assembly structure from the body.
5. Reinstall by performing the above steps in reverse order.
Estate
6. Remove the rear side trim panel to gain access to the electrical wiring. Disconnect the electrical wiring plug from the rear of the taillight assembly structure.
7. Unscrew the four mounting screws and remove the assembly. After removing the rubber pad, you can remove the light bulb holder and electrical wiring.
8. Reinstall by performing the above steps in reverse order.
Visitor comments